Nickel Mesh Pad
Nickel mesh pad has good resistance to corrosion in acids and alkalis and is most useful under reducing conditions. It has outstanding resistance to caustic alkalis up to and including the molten state. Nickel mesh pad is virtually immune to inter granular attack above 315C, chlorates must be kept to a minimum. In acid, alkaline and neutral salt solutions, Nickel Mesh pad shows good resistance, but in oxidizing salt solutions severe attack will occur. Nickel mesh pad has resistance to mineral acids varies according to temperature and concentration and whether the solution is aerated or not. corrosion resistance is better in de-aerated acid.
Xinxing Nickel produces and stocks mesh for custom pad construction from pure nickel to monel, incoloy, titanium and other nonferrous metals. We can provide you with the best combination product to remove droplets from your gas stream. This assures you the best performance at the lowest cost.
Technical Data
Typical Limit Drop sizes = 3 microns
Mesh Pad Velocities = 450 fpm
Typical Mesh Pad pressure drop STP = 0.4" w.c.
Mesh Pad + Profile Mist Eliminator Velocity = 1100 fpm
Typical Pressure drop for Mesh Pad + Profile Mist Eliminator combination 0.6" w.c.
Available specifications:
Diameter:1000-4100mm
Thinkness:100-200mm
Filtration rating: 98%-98.9%
Chemical Composition:
| Main substance composition (%) | Total substance composition |
C | Si | Fe | Mg | Cu | S | Zn | As | Cd | P | Sn | Sb | Pb | Bi |
>99.5% | 0.1 | 0.1 | 0.1 | 0.1 | 0.6 | 0.015 | 0.007 | 0.004 | 0.004 | 0.002 | 0.002 | 0.002 | 0.002 | 0.002 | <0.5% |