Tantalum Mesh Demister
Tantalum is highly conductive of heat and electricity. It is renowned for its resistance to corrosion by acids.
Demister is also known as mist eliminator made from knitted wire with Tantalum material.
Small liquid particles are inevitable during many manufacturing processes. These particles can cause lots of problems such as equipment corrosion, product contamination, and causing equipment damage. And it also can cause air pollution. Our demister pad is designed to remove nearly any type of particles.
Technical Data:
Typical Limit Drop sizes = 3 microns
Mesh Pad Velocities = 450 fpm
Typical Mesh Pad pressure drop STP = 0.4w.c.
Mesh Pad + Profile Mist Eliminator Velocity = 1100 fpm
Typical Pressure drop for Mesh Pad + Profile Mist Eliminator combination= 0.6w.c.
Available specifications:
Diameter:1000-4100mm
Thinkness:100-200mm
Filtration rating: 98%-98.9%
Chemical Composition (ppm):
Designation | Chief component | Impurities maximum |
Ta | Nb | Fe | Si | Ni | W | Mo | Ti | O | C | H | N |
Ta1 | Remainder | 300 | 40 | 30 | 20 | 40 | 40 | 20 | 150 | 40 | 15 | 20 |
Ta2 | Remainder | 800 | 100 | 100 | 50 | 200 | 200 | 50 | 200 | 100 | 15 | 100 |
TaNb3 | Remainder | <35000 | 100 | 100 | 50 | 200 | 200 | 50 | 200 | 100 | 15 | 100 |
TaNb20 | Remainder | 170000- 230000 | 100 | 100 | 50 | 200 | 200 | 50 | 200 | 100 | 15 | 100 |
Ta2.5W | Remainder | 400 | 50 | 30 | 20 | 30000 | 60 | 20 | 150 | 50 | 15 | 60 |
Ta10W | Remainder | 400 | 50 | 30 | 20 | 110000 | 60 | 20 | 150 | 50 | 15 | 60 |
Preferred applications:
To reduce loss of valuable products
To increase throughout capacity
To improve product purity
To protect compressors
To deal with condensates
To reduce down sream corrosion and fouling
To prevent air or water pollution Features:
High efficiency, wide operation range, easy installing, low cost.