302 Stainless Steel Strip /Sheet /Plate from China manufacturer

Payment Terms:	T/T,L/C,D/A,D/P,WU
Place of Origin:	Hebei, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: Thickness: Min0.05mm

Production Capacity: 2000kg/day

Delivery Date: 2-30days

Means of Transport: Ocean,Land,Air

Packing: Standard package

302 Stainless Steel Strip: Stainless Steel Strip

Type 302 is a slightly higher carbon version of type 304, most commonly found in strip and wire forms. It still used in a variety of industries.

302 Stainless Steel Strip

Availability

Type 302 is a slightly higher carbon version of type 304, most commonly found in strip and wire forms. While still used in a variety of industries, many applications have shifted to 304 and 304L due to advances in
melting technology, availability and cost.
Strip Thickness: 0.05mm and above
Chemistry Data:

Carbon	0.15 max
Chromium	17 - 19
Iron	Balance
Manganese	2 max
Nickel	8 - 10
Phosphorus	0.045 max
Silicon	1 max
Sulphur	0.03 max

Physical Data:


Density (lb / cu. in.)	0.287
Specific Gravity	7.94
Specific Heat (Btu/lb/Deg F - [32-212 Deg F])	0.12
Electrical Resistivity (microhm-cm (at 68 Deg F))	432
Melting Point (Deg F)	2590
Modulus of Elasticity Tension	28

Principal Design Features	Type 302 is a slightly higher carbon version of type 304, most commonly found in strip and wire forms. While still used in a variety of industries, many applications have shifted to 304 and 304L due to advances in melting technology, availability and cost.
Applications	Primarily used in the stamping, spinning and wire forming industry. This alloy is formed into all types of washers, springs, screens and cables.
Machinability	Slow speeds and high feeds will overcome this alloys tendency to work harden. Due to gummy chips, it is recommended that chip breakers are used on all tooling.
Welding	This alloy can best be welded by resistance or shielded fusion methods. Filler metals should be AWS E/ER308 or 312. Post weld annealing dissolves the chromium carbide and is recommended for maximum resistance to intergranular attack.
Forging	Commence forging at 2100-2300 F(1149-1260 C). Do not forge below 1700 F (927 C).
Hot Working	Uniform heating to 2100 F(1149 C) will allow this allow to be forged, upset and headed successfully. Do not work 302 below 1700 F (927 C). Forgings should be fully annealed after all operations to reattain maximum corrosion resistance.