Nickel Iron Alloy Nilo wire from China manufacturer

Payment Terms:	T/T,L/C,D/A,D/P,WU
Place of Origin:	Hebei, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: Dia. 0.05mm-10.0mm

Production Capacity: 20 tons per month

Delivery Date: 2-30 days

Nickel Iron wire: Ni50Fe wire

Means of Transport: Ocean,Land,Air

Packing: Reeled and Sealed up

Brand Name: XinXing

Ni50Fe Nilo wire (SMA50) possesses a very high saturation flux density of any Nickel-Iron alloy.Wire:Diameter:0.03mm-10mm. Used in laminated cores.

Ni50Fe Wire

Ni50Fe wire (SMA50) possesses a very high saturation flux density of any Nickel-Iron alloy. This high saturation flux density combined with high magnetic permeability and low core loss makes them versatile alloys with many potential applications. They are primarily used in laminated cores for instrument transformers, magnetic shield and cores for all certain electronic and communications devices in which extremely high permeability at low magnetizing forces greatly increases the efficiency and effectiveness of the equipment.

To ensure the quality of our product, we can produce the product with raw materials from the international suppliers. Every batch of product can be tracked to the original raw material supplier. We co-operate with international suppliers like Allvac(ATI), Bohler, Carpenter, Dunkirk, Gloria, OttoKumpu, SMC, ThyssenKrupp VDM, Valbruna, etc.

Wire: Diameter: 0.03mm-10mm

Typical Chemistry (Wt.%) of Ni50Fe wire:

Alloy	Ni	Mn	Si	C	Fe
SMA 50	47.5 – 50.0	1.0 max.	0.30 max.	0.10 max.	Balance

The chemistry is so adjusted that the alloy shall have highest saturation flux density in the family of all nickel iron alloys.

Magneticof Ni50Fe wire:

Alloy	Permeability µI	Permeability µmax	Coercive Force Hc (Oe)	Saturation Flux Density Bs (Tesla)
SMA 50	7500	100K	0.05	1.6

These can be adjusted by different heat treatment practice depending upon the component and its end use.

Physical Properties of Ni50Fe wire:

Alloy	Density (gm/cm³)	Resistivity (µΩ cm)	Curi Temprature (°C)	Thermal Expansion (10-6/°C)
SMA 50	8.2	45	450	8

Heat Treatment

Good results are only obtained by proper heat treatment of finished components. This consists of heating the components in temperature range exceeding 950°C, holding at this temperature and then cooling at determined cooling rate. Controlled atmosphere or very dry gases such as hydrogen or cracked ammonia is necessary to prevent the parts from oxidation.

Wire Further Processing	Cut to length Wire
	Flat Wire
	Square and Shaped Wire
	Rewinding and spooling
	Polishing and cleaning

Product Description: The product produced by us is of good quality and is priced reasonably.

Competitive price: The labour cost and cost on procuring the raw materials is low and hence the manufacturing cost is reasonable. We provide high facility in short producing cycle and have strong adaptive capacity in producing variation of products.

High quality assured: The work done by us has a good command of advanced technological process in the respect of smelting, rolling, drawing and heat treatment up to finished products. The chemical analysis department, the physical testing department and the quality control department all operate an all-round monitoring of our products from raw materials to final products.

Packing Process & Transportation:

Packaging: Seal up, with plastic inside and wooden case or carton outside; or according to the customer's requirements.

Transportation: By air: Beijing International Airport OR By sea: Trianjin Seaport

We provide our customers with excellent services. If you want more detailed information of this product or related problems, please contact with us, we will reply as soon as possible (general in 24 hours).