Nickel Iron Alloy Wire (Total 20 Products)

Mumetal Rod consists of extremely high initial magnetic permeability and maximum permeability with minimum hysteresis losses

2013-11-15

Hard and ductile Nilo 52 Rod offers constant configuration in the dynamic temperature ranges about 565°C or 1050°F

2013-11-15

Nilo 36 Rod just like other age hardening nickel alloys offers highest configuration consistency in the annealed conditions

2013-11-15

Nilo 48 Rod includes nominal coefficient of thermal expansion, superior ductility, hardness and large mechanical characteristics

2013-11-15

The Nilo 42 Rod is attributed of lower coefficient of thermal expansion at the large series of temperature ranges.

2013-11-15

Hastelloy B-3 Rod causes large resistance to HCl at the entire concentrations and temperature ranges and also resists pitting corrosion.

2013-11-15

Hastelloy B-2 Rod imparts hefty resistance to various contents of hydrochloric acid and wide range of temperatures.

2013-11-26

Dia. 0.05mm-10.0mm

MuMetal wire offers important electromagnetic field shielding characteristics with high magnetic. Wire: Diameter: 0.05mm-10mm. 0.02Inch-0.3937Inch.

2013-11-14

Dia. 0.05mm-10.0mm

Permalloy wire is a soft magnetic alloy wire with exceptionally high magnetic permeability.Wire Diameter: 0.05mm-10.0mm, 0.002 Inch to 0.3937 Inch.

2013-11-14

Dia. 0.05mm-10.0mm

Ni30Fe wire is a Nickel-Iron alloy that is used for applications where magnetic shunts are used for temperature compensation. Dia:0.05mm-10.0mm

2013-11-14

Diameter: 3mm above, Length: 20mm above

Ni span C902 rod is attributed of negative thermoplastic coefficient, highly tough and large tensile strength offers high resistance to corrosion.

2013-11-14

Dia. 0.05mm-10.0mm

Ni32Fe wire is a Nickel-Iron alloy that is used for applications where magnetic shunts are used for temperaturecompensation.Diameter: 0.05mm-10.0mm.

2013-11-14

Dia. 0.05mm-10.0mm

Ni50Fe Nilo wire (SMA50) possesses a very high saturation flux density of any Nickel-Iron alloy.Wire:Diameter:0.03mm-10mm. Used in laminated cores.

2013-11-14

Dia.0.05mm to 10.0mm

NiFe 60/40 wire is high nickel based welding wire for joining and rebuilding cast iron. Wire Diameter: 0.05mm-10mm. Has excellent weld ability.

2013-11-14

0.05mm to 10.0mm

Nilo 36 wire is nickel-iron controlled expansion alloy wire with high magnetic permeability.Wire Diameter:0.05mm-10.0mm, 0.002 Inch to 0.3937 Inch.

2013-11-14

Dia. 0.05mm-10.0mm

Invar 36-Alloy 36: possessing a rate of thermal expansion approximately one-tenth that of carbon steel at temperatures up to 400ºF Diameter:0.05-10mm

2013-11-14