Monel Alloy 400 Wires from China manufacturer - Heanjia Super-metals Co., Ltd.

Price:	30.0~40.0 USD
Payment Terms:	T/T,L/C,D/A,D/P,WU,
Place of Origin:	Hebei, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: Dia. 0.05mm-10.0mm

Production Capacity: 50 tons/month

Delivery Date: 2~30days

Monel 400 Wire: Alloy 400 Wire

Means of Transport: Ocean,Land,Air,

Packing: Standard package

Brand Name: Xinxing

Monel alloy 400 Wire: Corrosion resisting. Resistant to salt and caustic solutions, sea water and steam at high temperatures.Dia:0.05mm-10.0mm

MONEL ALLOY 400 WIRE

Monel Alloy 400 Wire is corrosion resisting, such as resistant to sea water and steam at high temperatures, resistant to salt and caustic solutions. Meanwhile, Monel Alloy 400 Wire exhibits characteristic like high strength.

Monel Alloy 400 Wire has low corrosion rate in flowing brackish or seawater while performing excellent resistance to stress-corrosion cracking in most freshwaters. This Wire's good resistance to a variety of corrosive conditions contributes to the wide application in marine and other non-oxidizing chloride solutions.Monel Alloy 400 Wire is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. However, its high copper content, make alloy 400 can be rapidly attacked by nitric acid and ammonia systems.

Monel Alloy 400 Wire also has good Adaptability to wide range of application temperature. It maintains good mechanical properties at subzero temperatures, as well as in temperatures up to 1000° F, The melting point is 2370-2460° F.

Manufacture's Objective Comments:

Monel Alloy 400 Wire is immune to chloride ion stress corrosion cracking in typical environments. Besides, it is good corrosion resistant in reducing environments, but poor in oxidizing conditions. It is not useful in oxidizing acids, such as nitric acid and nitrous.

Monel Alloy 400 Wire would be attacked in sulfur-bearing gases above approximately 700° F and molten sulfur attacks the alloy at temperatures over approximately 500° F. However, it is resistant to most alkalis, salts, waters, food products, organic substances and atmospheric conditions at normal and elevated temperatures.Monel Alloy 400 Wire offers about the same corrosion resistance as Monel but with higher maximum working pressures and temperatures and at a lower cost due to its superior ability to be machined.

Monel 400 alloy Wire Applications:

Marine engineering	Chemical and hydrocarbon processing equipment
Gasoline and freshwater tank	Crude petroleum stills
De-aerating heaters	Boiler feed water heaters and other heat exchangers
Industrial heat exchangers	Crude oil distillation towers
Chlorinated solvents	Valves, pumps, shafts, fittings, and fasteners

Monel 400 wire Chemical composition (%)
C	Mn	S	Si	Ni	Cu	Fe
.30 max	2.00 max	.024 max	.50 max	63.0 min	28.0-34.0	2.50 max

Mechanical Property Requirements


	Ultimate Tensile	Yield Strength (0.2% OS)	Elong. in 2 in. or 50mm (or 4D), min.,%
Cold Worked/SR
Min	87 KSi	60 KSi	20B
Min	600 MPa	415 MPa	20B

Characteristics:

1. Resistant to seawater and steam at high temperatures

2. Excellent resistance to rapidly flowing brackish water or seawater

3. Excellent resistance to stress corrosion cracking in most freshwaters

4. Particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated

5. Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations, but is seldom the material of choice for these acids

6. Excellent resistance to neutral and alkaline salt

7. Resistance to chloride induced stress corrosion cracking

8. Good mechanical properties from sub-zero temperatures up to 1020° F

9. High resistance to alkalis

Available Specifications In Our Wire Mesh Factory:

Wire Diameter: 0.05mm-10.0mm, 0.002 Inch to 0.3937 Inch

Wire Further Processing	Cut to length Wire
	Flat Wire
	Square and Shaped Wire
	Rewinding and spooling
	Polishing and cleaning

Product Description: The product produced by us is of good quality and is priced reasonably.

Competitive price: The labour cost and cost on procuring the raw materials is low and hence the manufacturing cost is reasonable. We provide high facility in short producing cycle and have strong adaptive capacity in producing variation of products.

High quality assured: The work done by us has a good command of advanced technological process in the respect of smelting, rolling, drawing and heat treatment up to finished products. The chemical analysis department, the physical testing department and the quality control department all operate an all-round monitoring of our products from raw materials to final products.

Packing Process & Transportation:

Packaging: Seal up, with plastic inside and wooden case or carton outside; or according to the customer's requirements.

Transportation: By air: Beijing International Airport OR By sea: Trianjin Seaport

We provide our customers with excellent services. If you want more detailed information of this product or related problems, please contact with us, we will reply as soon as possible (general in 24 hours).