Monel K500 Wire from China manufacturer - Heanjia Super-metals Co., Ltd.

Price:	25.0~50.0 USD
Payment Terms:	T/T,L/C,D/A,D/P,WU,
Place of Origin:	Hebei, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: Dia. 0.05mm -10.0mm

Production Capacity: 50 tons/month

Delivery Date: 2-20 days

Monel K500 Wire: Monel K500 Wire

Means of Transport: Ocean,Land,Air,

Packing: Standard package

Brand Name: Xinxing

Monel K500 Wire: combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness.

Monel K500 Wire

Monel K500 Wire is one kind of the nickel-copper alloy Wire. Monel K500 Wire combines the excellent corrosion resistance of Monel 400 Wire with the added advantage of greater strength and hardness.Alloy K500 Wire has approximately three times the yield strength and double the tensile strength when compared with alloy 400. When in the age-hardened condition,

Monel K500 Wire has a greater tendency toward stress-corrosion cracking in some conditions than Monel 400 alloy Wire. The strength of this nickel Copper alloy is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F. Its melting range is 2400-2460° F. Nickel alloy K-500 Wire has a greater tendency toward stress-corrosion cracking in some environments.

Monel K500 Wire is resistant to a sour-gas environment. The combined Characteristics of very low corrosion rates in high-velocity sear water and high strength make alloy K-500 Wire particularly suitable for marine service. In stagnant or slow-moving sea water, fouling may occur followed by pitting but this pitting slows down after a fairly rapid initial attack.

The low-temperature properties of MONEL alloy K-500 are outstanding. Tensile and yield strengths increase with decrease in temperature while ductility and toughness are virtually unimpaired. No ductile-to-brittle transformation occurs even at temperatures as low as that of liquid hydrogen. Thus the alloy is suitable for many cryogenic applications.

To ensure the quality of our product, we can produce the product with raw materials from the international suppliers. Every batch of product can be tracked to the original raw material supplier. We co-operate with international suppliers like Allvac(ATI), Bohler, Carpenter, Dunkirk, Gloria, OttoKumpu, SMC, ThyssenKrupp VDM, Valbruna, etc.

Manufacture's Advices to Monel K500 alloy Wire:

Nickel alloy is spark resistant and non-magnetic to -200° F. However, it is possible to develop a magnetic layer on the surface of the material during processing. Aluminum and copper may be selectively oxidized during heating, leaving a magnetic nickel rich film on the outside. Pickling or bright dipping in acid can remove this magnetic film and restore the non-magnetic properties.

Monel K500's applications:

Pump Shafts
Fasteners

Marine Propeller Shafts

Oil Well Tools

Instruments

Springs

Sour-gas service applications

Oil and gas production safety lifts and valves

Oil-well tools and instruments

Oil well industry

Available Specifications InOur Factory:

Wire Diameter: 0.05mm-10.0mm, 0.002 Inch to 0.3937 Inch

Monel K 500 Chemical Composition, %

Ni	Cu	Al	Ti	C	Mn	Fe	S	Si
63.0-70.0	Remainder	2.30-3.15	.35-.85	.25 max	1.5 max	2.0 max	.01 max	.50 max

Physical Properties

Property	Metric	Imperial
Density	8.44 g/cm³	0.305lb/in³
Melting point	1350°C	2460°F
Co-Efficient of Expansion	13.7µm/m.°C (20-100°C)	7.6x10^-6 in/in.°F (70-212°F)
Modulus of rigidity	66 kN/mm²	9573 ksi
Modulus of elasticity	179 kN/mm²	25962 ksi

Wire Further Processing	Cut to length Wire
	Flat Wire
	Square and Shaped Wire
	Rewinding and spooling
	Polishing and cleaning

Product Description: The product produced by us is of good quality and is priced reasonably.

Competitive price: The labour cost and cost on procuring the raw materials is low and hence the manufacturing cost is reasonable. We provide high facility in short producing cycle and have strong adaptive capacity in producing variation of products.

High quality assured: The work done by us has a good command of advanced technological process in the respect of smelting, rolling, drawing and heat treatment up to finished products. The chemical analysis department, the physical testing department and the quality control department all operate an all-round monitoring of our products from raw materials to final products.

Packing Process & Transportation:

Packaging: Seal up, with plastic inside and wooden case or carton outside; or according to the customer's requirements.

Transportation: By air: Beijing International Airport OR By sea: Trianjin Seaport

We provide our customers with excellent services. If you want more detailed information of this product or related problems, please contact with us, we will reply as soon as possible (general in 24 hours).