Monel Wire Mesh Oil Well Instrument from China manufacturer

Payment Terms:	T/T,L/C,D/A,D/P,WU,
Place of Origin:	Hebei, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: 0.5-250 mesh

Production Capacity: 50,000 square meters/month

Delivery Date: 2 to 30 days

Material: Others

Mesh Size: 0.5-250 mesh

Means of Transport: Ocean,Land,Air,

Packing: Standard package

Type: Expanded

Brand Name: Xinxing

Monel Mesh Oil Well: Monel Mesh Oil Well Tool

Monel Mesh/Screen for oil well Industry instruments:Excellent corrosion resistance&added advantage of greater strength&hardness.High yield strength.

Monel Mesh/Screen for Oil Well Industry Tools and Instruments

Monel K-500 Mesh/Screen combines the excellent corrosion resistance of Monel 400 Mesh with the added advantage of greater strength and hardness. It is widely used in oil well industry tools and instruments.

Monel K-500 Mesh/Screen has approximately three times the yield strength and double the tensile strength when compared with alloy 400. When in the age-hardened condition, Monel K500 Mesh has a greater tendency toward stress-corrosion cracking in some conditions than Monel 400 alloy Mesh. The strength of this nickel Copper alloy is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F. Its melting range is 2400-2460° F. Nickel alloy K-500 Mesh has a greater tendency toward stress-corrosion cracking in some environments.

Monel K500 Mesh/Screen is resistant to a sour-gas environment. The combined Characteristics of very low corrosion rates in high-velocity sear water and high strength make alloy K-500 mesh particularly suitable for marine service. In stagnant or slow-moving sea water, fouling may occur followed by pitting but this pitting slows down after a fairly rapid initial attack.

Manufacture's Advices to Monel K-500 alloy Mesh:

This kind of nickel alloy is spark resistant and non-magnetic to -200° F. However, it is possible to develop a magnetic layer on the surface of the material during processing. Aluminum and copper may be selectively oxidized during heating, leaving a magnetic nickel rich film on the outside. Pickling or bright dipping in acid can remove this magnetic film and restore the non-magnetic properties.

Monel K-500 mesh's Applications:

      Sour-gas service applications
      Oil and gas production safety lifts and valves
      Oil-well tools and instruments
      Oil well industry

Chemical Composition, % of Monel K 500:

Ni	Cu	Al	Ti	C	Mn	Fe	S	Si
63.0-70.0	Remainder	2.30-3.15	.35-.85	.25 max	1.5 max	2.0 max	.01 max	.50 max

Mesh Weaving Method

Expanded Mesh

Perforated Mesh

Twill Weave mesh

Dutch Twill Weave Cloth

Dutch Plain Weave

Dutch Weave Mesh

Reverse Dutch Weave Cloth

5-heddle Weave Mesh

Cross twill weave

Plain Weaving Mesh

The Service Part has more information about mesh form.

Product Description: The product produced by us is of good quality and is priced reasonably.

Competitive price: The labour cost and cost on procuring the raw materials is low and hence the manufacturing cost is reasonable. We provide high facility in short producing cycle and have strong adaptive capacity in producing variation of products.

High quality assured: The work done by us has a good command of advanced technological process in the respect of smelting, rolling, drawing and heat treatment up to finished products. The chemical analysis department, the physical testing department and the quality control department all operate an all-round monitoring of our products from raw materials to final products.

Packing Process & Transportation:

Packaging: Seal up, with plastic inside and wooden case or carton outside; or according to the customer's requirements.

Transportation: By air: Beijing International Airport OR By sea: Trianjin Seaport

We provide our customers with excellent services. If you want more detailed information of this product or related problems, please contact with us, we will reply as soon as possible (general in 24 hours).