SUPER ALLOY NICKEL 205 STRIP
Nickel 205 Strip is a wrought nickel similar to Nickel 200 but with compositional adjustments to enhance performance in electronic applications. Nickel 205 Strip is most commonly used for the anodes and grids of electronic valves, magnetostrictive transducers, lead sheets, transistor housings, and battery cases. Nickel 205 is available in Sheet, Strip and Sheet.
To ensure the quality of our product, we can produce the product with raw materials from the international suppliers. Every batch of product can be tracked to the original raw material supplier. We co-operate with international suppliers like Allvac(ATI), Bohler, Carpenter, Dunkirk, Gloria, OttoKumpu, SMC, ThyssenKrupp VDM, Valbruna, etc.
Specifications:
AMS 5555 | ASTM F1 | ASTM F3 | MIL N-46025 | UNS N02205 |
Chemistry Dataof Nickel 205 Strip:
Basic Chemical Composition |
Weight % | Ni | Mg | Ti | Cu | Fe | C | Si | S | Mn |
Nickel 205 | 99.0 min | 0.01-0.08 | 0.01-0.05 | 0.15 max | 0.20 max | 0.15 max | 0.15 max | 0.008 max | 0.35 max |
Physical Properties of Nickel 205 Strip:
HEAT TREATED CONDITION | ENGLISH UNITS | METRIC UNITS |
Melting Range | 2615-2635°F | 1435-1445°C |
Density | .321 lb/cu in. @ 68°F | 8.89 gm/cm@ 20°C |
Specific Gravity | 8.89 | 8.89 |
Coefficient of Thermal Expansion | .000079 per °F (68-392°F) | .0000146 per °C (20-200°C) |
Thermal Conductivity | 35 BTU/sq ft/ft/hr/°F @ 68°F | .145 cal/sq cm/cm/sec/°C @ 20°C |
Electrical Resistivity | 57.0 Ohms circ mil per ft @ 68°F | 9.5 microhm - cm @ 20°C |
Electrical Conductivity | 18.2% Copper IACS @ 68°F | .105 megohm cm @ 20°C |
Specific Heat | .109 BTU/lb/°F @ 68°F | .109 cal/gm/°C @ 20°C |
Modulus of Elasticity (tension) | 30,000 KSI | 21,000 kg/sq mm |
Modulus of Rigidity (torsion) | 11,000 KSI | 7700 kg/sq mm |
Annealing Temperature | 1300-1700°F | 705-925°C |
Mechanical Properties of Nickel 205 strip:
TEMPER | TENSILE STRENGTH | YIELD STRENGTH .2% Offset |
KSI* nominal | MPa** nominal | KSI* nominal | MPa** nominal |
Annealed (A) | 55-85 | 379-586 | 15-50 | 103-344 |
Eighth Hard (1/8H) | 80-95 | 551-655 | - | - |
Quarter Hard (1/4H) | 70-95 | 482-655 | - | - |
Half Hard to Hard | 105-140 | 723-965 | 105-135 | 723-930 |
Spring | 125-145 | 861-1000 | 105-135 | 723-930 |
Principal Design Features of Nickel 205 strip:
Nickel 205 Stripis one of the family of essentially
pure nickel materials. In this instance the alloy contains small additions of aluminum and titanium for a good combination of mechanical and electrical properties.
Applications:
Used for terminals, mechanical supports, and other related components in vacuum tubes for electrical devices.
Product Description: The product produced by us is of good quality and is priced reasonably.
Competitive price: The labour cost and cost on procuring the raw materials is low and hence the manufacturing cost is reasonable. We provide high facility in short producing cycle and have strong adaptive capacity in producing variation of products.
High quality assured: The work done by us has a good command of advanced technological process in the respect of smelting, rolling, drawing and heat treatment up to finished products. The chemical analysis department, the physical testing department and the quality control department all operate an all-round monitoring of our products from raw materials to final products.
Packing Process & Transportation:
Packaging: Seal up, with plastic inside and wooden case or carton outside; or according to the customer's requirements.
Transportation: By air: Beijing International Airport OR By sea: Trianjin Seaport
We provide our customers with excellent services. If you want more detailed information of this product or related problems, please contact with us, we will reply as soon as possible (general in 24 hours).