China Monel Wire Mesh manufacturer & supplier

Dia.0.05mm to 10.0mm

Incoloy 330Wire:good high-temperature strength and corrosion resistance.Solid solution composition and not hard enable by heat treatment.Dia:0.05-10mm

2013-06-25

0.5-250 mesh

IIncoloy 801/802/803 Wire Mesh/ screen:good resistance to stress corrosion cracking,can be sensitized or made susceptible to intergranular attack.

2013-06-24

Thickness: Min0.05mm

Ni50Fe Sheet (SMA50) has very high saturation flux density of any Nickel-Iron alloy.Sheet Plate Strip:Thickness: 0.05mm & above.Magnetic permeability.

2013-11-14

0.5-250 mesh

Ni50Fe wire (SMA50) possesses a very high saturation flux density of any Nickel-Iron alloy. Mesh: 1-250mesh Thickness: 0.05mm and above.

2013-11-14

Dia. 0.05mm-10.0mm

Ni50Fe Nilo wire (SMA50) possesses a very high saturation flux density of any Nickel-Iron alloy.Wire:Diameter:0.03mm-10mm. Used in laminated cores.

2013-11-14

Thickness: Min0.05mm

Incoloy 801/802/803 Sheet is a high nickel alloy with high temperature resistant tensile strength ,Resistance to oxidation, reduction, nitriding .

2013-06-24

Thickness: Min0.05mm

5 Alloy Sheet: corrosion-resistant copper alloy, resistant moisture, non-oxidising acids, alkalis and organic acids. Sheet Thickness: 0.05mm and above

2013-07-07

Thickness: Min0.05mm

NiFe 60/40 sheet is welding wire suitable for joining & repairing all types of grey cast iron, cast iron with steel. Sheet: Thickness:0.05mm and above

2013-11-14

Cu-Ni 5 Alloy Wire Mesh/Screen:Corrosion-resistant copper alloy, resistant moisture, non-oxidising acids, alkalis and salt solutions and organic acids

2013-07-06

0.5-250 mesh

NiFe 60/40 wire mesh/screen is high nickel based welding wire for joining and rebuilding cast iron. Mesh: 0.5-250 mesh/Inch. Thickness: Min0.05mm

2013-11-14

Dia.0.05mm to 10.0mm

NiFe 60/40 wire is high nickel based welding wire for joining and rebuilding cast iron. Wire Diameter: 0.05mm-10mm. Has excellent weld ability.

2013-11-14

Thickness: Min0.05mm

15 Alloy Sheet: the temperature coefficient of resistance is low. It can be used as general resistance sheet and core of low temperature heaters.

2013-07-07

0.5-250 mesh

15 Alloy Wire Mesh: the temperature coefficient of resistance is low.It can be used as general resistance wire mesh and core of low temperature heater

2013-07-06

Thickness: Min0.05mm

Copper Nickel 10 Alloy Sheet Plate Strip: Resistant corrosion and stress cracking. It is known for its moderate strength, weldability and formability.

2013-07-07

Copper Nickel 10 Alloy Wire Mesh/Screen: resistant corrosion and stress cracking. It is known for its moderate strength, weldability and formability.

2013-07-06

Thickness: Min0.05mm

Alloy 30 Sheet:especially characterized by low resistivity and high corrosion resistance.And used for low-value resistors, for heating sheets and mats

2013-07-07