Nickel Copper Alloy Sheets (Total 15 Products)

The Constantan Tape includes 55% copper and 45% nickel having stable resistivity and high strain sensitivity at the dynamic temperature ranges

2013-11-19

The Carpenter HyMu80 Tape includes of nickel, iron and molybdenum that has significant initial permeability and maximum permeability.

2013-11-19

The Copper Nickel Cu70/Ni30 Tape is widely resistant to bio-fouling and corrosion in sea-water with wide modifications in the performance of alloys

2013-11-19

The Copper Nickel Cu90/Ni10 Tape is comprised of abruptly large resistance features to the corrosion and bio fouling in sea water.

2013-11-19

Thickness: Min0.05mm

Constantan Sheet Plate Strip: CuNi44 has very low temperature coefficient, high electrical resistance, high ductility and non-corroding properties

2013-07-06

Thickness: Min0.05mm

90/10 Copper Nickel Alloy Sheet Plate Strip:Excellent Resistance to Corrosion and Bio Fouling in Sea Water, high resistance to sea water environments.

2013-07-06

Thickness: Min0.05mm

Copper Nickel Cu70 Ni30 Alloy Sheet has better Resistant to Corrosion, high resistance to sea water environments and Bio Fouling in Sea Water.

2013-07-06

Thickness: Min0.05mm

Copper Nickel CuNi6 Sheet is a Cu-Ni resistance alloy ,this alloy has low electrical resistivity and is solderable strip: Thickness:0.05mm above.

2013-07-06

Thickness: Min0.05mm

CuNi10 Sheet Plate Strip, also known as Cuprothal 15 strip, is a copper-nickel alloy strip with medium-low resistivity for low temperature resitance.

2013-07-07

Thickness: Min0.05mm

Copper Nickel CuNi23 Sheet Plate strip is a copper-nickel alloy (CuNi alloy) with medium resistivity for medium-low temperature resistances.

2013-07-07

Thickness: Min0.05mm

5 Alloy Sheet: corrosion-resistant copper alloy, resistant moisture, non-oxidising acids, alkalis and organic acids. Sheet Thickness: 0.05mm and above

2013-07-07

Thickness: Min0.05mm

Copper Nickel 10 Alloy Sheet Plate Strip: Resistant corrosion and stress cracking. It is known for its moderate strength, weldability and formability.

2013-07-07

Thickness: Min0.05mm

15 Alloy Sheet: the temperature coefficient of resistance is low. It can be used as general resistance sheet and core of low temperature heaters.

2013-07-07

Thickness: Min0.05mm

Alloy 30 Sheet:especially characterized by low resistivity and high corrosion resistance.And used for low-value resistors, for heating sheets and mats

2013-07-07

Thickness: Min0.05mm

The alloy has very high erosion, corrosion resistance and very high weld ability.It gives the best service life under the most adverse conditions.

2013-07-07