Nickel Copper alloys (Total 47 Products)

Thickness: Min0.05mm

The alloy has very high erosion, corrosion resistance and very high weld ability.It gives the best service life under the most adverse conditions.

2013-07-07

Thickness: Min0.05mm

Alloy 30 Sheet:especially characterized by low resistivity and high corrosion resistance.And used for low-value resistors, for heating sheets and mats

2013-07-07

Thickness: Min0.05mm

15 Alloy Sheet: the temperature coefficient of resistance is low. It can be used as general resistance sheet and core of low temperature heaters.

2013-07-07

Thickness: Min0.05mm

Copper Nickel 10 Alloy Sheet Plate Strip: Resistant corrosion and stress cracking. It is known for its moderate strength, weldability and formability.

2013-07-07

Thickness: Min0.05mm

5 Alloy Sheet: corrosion-resistant copper alloy, resistant moisture, non-oxidising acids, alkalis and organic acids. Sheet Thickness: 0.05mm and above

2013-07-07

Thickness: Min0.05mm

Copper Nickel CuNi23 Sheet Plate strip is a copper-nickel alloy (CuNi alloy) with medium resistivity for medium-low temperature resistances.

2013-07-07

Thickness: Min0.05mm

CuNi10 Sheet Plate Strip, also known as Cuprothal 15 strip, is a copper-nickel alloy strip with medium-low resistivity for low temperature resitance.

2013-07-07

Thickness: Min0.05mm

Copper Nickel CuNi6 Sheet is a Cu-Ni resistance alloy ,this alloy has low electrical resistivity and is solderable strip: Thickness:0.05mm above.

2013-07-06

Thickness: Min0.05mm

Copper Nickel Cu70 Ni30 Alloy Sheet has better Resistant to Corrosion, high resistance to sea water environments and Bio Fouling in Sea Water.

2013-07-06

Thickness: Min0.05mm

90/10 Copper Nickel Alloy Sheet Plate Strip:Excellent Resistance to Corrosion and Bio Fouling in Sea Water, high resistance to sea water environments.

2013-07-06

Thickness: Min0.05mm

Constantan Sheet Plate Strip: CuNi44 has very low temperature coefficient, high electrical resistance, high ductility and non-corroding properties

2013-07-06

Nickel-Copper 23 mesh/screen: Very malleable and good resistance to corrosion until temperatures of 400°C. CuNi23 Mesh:0.5-250 mesh.

2013-07-06

0.5-250 mesh

Alloy 30 Mesh:especially characterized by low resistivity and high corrosion resistance.It is used for low-value resistors, for heating meshs and mats

2013-07-06

0.5-250 mesh

15 Alloy Wire Mesh: the temperature coefficient of resistance is low.It can be used as general resistance wire mesh and core of low temperature heater

2013-07-06

Copper Nickel 10 Alloy Wire Mesh/Screen: resistant corrosion and stress cracking. It is known for its moderate strength, weldability and formability.

2013-07-06

Cu-Ni 5 Alloy Wire Mesh/Screen:Corrosion-resistant copper alloy, resistant moisture, non-oxidising acids, alkalis and salt solutions and organic acids

2013-07-06