FeCrAl0Cr15Al5 RESISTANCE HEATING WIRE
Introduction to products
FeCrAl 0Cr15Al5 Resistance Heating Wire has the characteristics of high resistance, low temperature coefficient of electric resistance, high operating temperature, good corrosion resistance under high temperature, as well as the lower price. FeCrAl 0Cr15Al5 Resistance Heating Wire is widely used in industrial electric furnace, household electrical appliance and far
infrared ray device.
Our company has developed the
perfect substitute of Kanthal Wire with high quality and more reasonable price. Our product's properties is as good as Kanthal, but the price is only one third.
Chemical Composition (%) ofFeCrAl0Cr15Al5 ResistanceHeatingWire:
Alloy | C | P | S | Mn | Si | Cr | Ni | Al | Fe |
0Cr15Al5 | 0.12 | 0.025 | 0.025 | 0.7 | ≤1.00 | 14.5-15.5 | — | 4.5-5.3 | Rest |
PropertiesofFeCrAl0Cr15Al5ResistanceHeatingWire:
Alloy | 0Cr15Al5 H15YU5 |
Yield strength(MPa) | 590-690 |
Elongation (%) | > 12 |
Density g/cm3 | 7.15 |
·Electrical resistivity (Ωmm2 / m) | 1.30 ± 0.05 |
The highest temperature continuous operation (° C) | 750 |
Melting point (° C) | 1500 |
Thermal conductivity (kJ / m * h * ° C) | 52.4 |
Coefficient of linear expansion (α×10-6 / ° C) | 6.15 |
Size Range
| Wire | Strip | Ribbon | Mesh |
Dia (mm) | 0.025-10 | - | - | - |
Width (mm) | - | 5-250 | 0.4-4 | - |
Thickness (mm) | - | 0.05-2.5 | >0.05 | >0.05 |
Product Description: The product produced by us is of good quality and is priced reasonably.
Competitive price: The labour cost and cost on procuring the raw materials is low and hence the manufacturing cost is reasonable. We provide high facility in short producing cycle and have strong adaptive capacity in producing variation of products.
High quality assured: The work done by us has a good command of advanced technological process in the respect of smelting, rolling, drawing and heat treatment up to finished products. The chemical analysis department, the physical testing department and the quality control department all operate an all-round monitoring of our products from raw materials to final products.
Packing Process & Transportation:
Packaging: Seal up, with plastic inside and wooden case or carton outside; or according to the customer's requirements.
Transportation: By air: Beijing International Airport OR By sea: Trianjin Seaport
We provide our customers with excellent services. If you want more detailed information of this product or related problems, please contact with us, we will reply as soon as possible (general in 24 hours).