MuMetal Sheet Plate Strip
MuMetal Sheet Plate Strip offers important electromagnetic field shielding characteristics, including very high magnetic permeability - its ability to absorb magnetic energy. The unique properties of MuMetal sheet results in the highest possible attenuation, making these shielding alloys the materials of choice for reducing low-frequency electromagnetic interference (EMI).
Sheet: Thickness:0.05mm above
Material | Mu-metal |
Specifications | ASTM A-753, Alloy 4; MIL N-14411C Composition 1 |
Typical Chemistry (Wt.%) of MuMetal sheet :
Ni | Fe | Mo | Cr | C | Mn | Si | P | S | Al | Co |
80.20 | Balance | 4.85 | 0.02 max | 0.015 | 0.50 | 0.30 | 0.005 max | 0.001 max | 0.01 max | 0.02 max |
Typical Annealed Properties of MuMetal sheet :
|
Density | 0.316 lb/in3 (8.25g/cm3) |
Melting point | 2650°F (1454°C) |
Curie temperature | 860°F (460°C) |
0.2% Yield Strength | 49ksi(338MPa) |
Tensile Strength | 99ksi (682MPa) |
Electrical Resistivity | 47microhm cm |
Elongation | 32% in 2" (51 mm) |
Grain Size | ASTM 7 or finer(Mill annealed) |
Hardness | 15T 85 |
Uses and properties:-
Mu-metal is used to shield equipment from magnetic fields. For example:
1. Electric power transformers, which are built with mu-metal shells to prevent them from affecting nearby circuitry
2.Hard Drives, which have mu-metal backings to the magnets found in the drive to keep the magnetic field away from the disk.
3.Cathode-ray tubes used in analogue oscilloscopes
4.Magnetic phonograph cartridges, which have a mu-metal case to reduce interference when LPs are played back
5.Magnetic resonance imaging equipment
6.The magnetometers used in magnetoencephalography and magnetocardiography
Photomultiplier tubes
7. Vacuum chambers for experiments with low-energy electrons, for example photoelectron spectroscopy
8.Superconducting circuits and especially Josephson junction circuits
Product Description: The product produced by us is of good quality and is priced reasonably.
Competitive price: The labour cost and cost on procuring the raw materials is low and hence the manufacturing cost is reasonable. We provide high facility in short producing cycle and have strong adaptive capacity in producing variation of products.
High quality assured: The work done by us has a good command of advanced technological process in the respect of smelting, rolling, drawing and heat treatment up to finished products. The chemical analysis department, the physical testing department and the quality control department all operate an all-round monitoring of our products from raw materials to final products.
Packing Process & Transportation:
Packaging: Seal up, with plastic inside and wooden case or carton outside; or according to the customer's requirements.
Transportation: By air: Beijing International Airport OR By sea: Trianjin Seaport
We provide our customers with excellent services. If you want more detailed information of this product or related problems, please contact with us, we will reply as soon as possible (general in 24 hours).