Sheet Plate and Strip - Heanjia Super-metals Co., Ltd.

Product Forms

Sheet Plate and Strip

Sheet, Plate and Strip

Sheet plate or strip is simply metal formed into thin and flat pieces. It is one of the fundamental forms used in metalworking, and can be cut and bent into a variety of different shapes. Countless everyday objects are constructed of the material. Thicknesses can vary significantly, although extremely thin thicknesses are considered foil or leaf, and pieces thicker than 6 mm (0.25 inch) are considered plate. The strip is reduced to approximately final thickness by cold-rolling directly, or with the inclusion of an annealing operation at some intermediate thickness to facilitate further cold reduction or to obtain mechanical properties desired in the finished product.

The thickness of the sheet plate or strip is called its gauge. Gauge is measured in ferrous (iron based) metals while nonferrous metals such as aluminum or copper are designated differently; i.e. Copper is measured in thickness by Ounce.

We are able to supply many different metals that can be made into sheet plate or strip, such as nickel, inconel, incoloy, monel, nichrome, aluminum, brass, copper, steel and titanium.

Specifications

Sheet/Plate: Regular Specifications:

1220X2440mm, 1530X2440mm, 1830X2440mm

Strip: Specifications:

Thickness 0.05mm to 10mm Width: 2mm to 500mm

Hardness: Full hard, Semi-hard, 1/4Hard, Soft

Processing

Sheet/Plate Processing: Sawing;Shearing;Circling; Polishing;Water Jet Cutting;Grinding

Strip Processing: Slitting;Cutting to Length;Blanking;Re-Rolling to Custom Thicknesses and Tempers;Edge Conditioning

ASTM Standards (Sheet, Plate and Strip)

A167	A167-99	Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
A176	A176-99	Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip
A240	A240/A240M-00	Specification for Heat-Resisting Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels
A263	A263-94a (1999)	Specification for Corrosion-Resisting Chromium Steel-Clad Plate, Sheet, and Strip
A264	A264-94a (1999)	Specification for Stainless Chromium-Nickel Steel-Clad Plate, Sheet, and Strip
A265	A265-94a (1999)	Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
A345	A345-98	Specification for Flat-Rolled Electrical Steels for Magnetic Applications
A366	A366/A366M-97e1	Specification for Commercial Steel (CS) Sheet, Carbon (0.15 Maximum Percent) Cold-Rolled
A370	A370-97a	Test Methods and Definitions for Mechanical Testing of Steel Products
A380	A380-99e1	Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
A424	A424-00	Specification for Steel, Sheet, for Porcelain Enameling
A480	A480/A480M-99b	Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A568	A568/A568M-00	Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
A569	A569/A569M-98	Specification for Steel, Carbon (0.15 Maximum, Percent), Hot-Rolled Sheet and Strip Commercial Quality
A570	A570/A570M-98	Specification for Steel, Sheet and Strip, Carbon, Hot-Rolled, Structural Quality
A604	A604-93 (1998)	Test Method for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
A611	A611-97	Specification for Structural Steel (SS), Sheet, Carbon, Cold-Rolled
A620	A620/A620M-97	Specification for Drawing Steel (DS), Sheet, Carbon, Cold-Rolled
A666	A666-00	Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
A682	A682/A682M-98a	Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For
A684	A684/A684M-86 (1998)	Specification for Steel, Strip, High-Carbon, Cold-Rolled
A693	A693-93 (1999)	Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A700	A700-99	Practices for Packaging, Marking, and Loading Methods for Steel Products for Domestic Shipment
A702	A702-89 (1994) e1	Specification for Steel Fence Posts and Assemblies, Hot Wrought
A715	A715-98	Specification for Steel Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled, and Steel Sheet, Cold-Rolled, High-Strength, Low-Alloy, with Improved Formability
A749	A749/A749M-97	Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
A751	A751-96	Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
A763	A763-93 (1999) e1	Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
A829	A829/A829M-95	Specification for Alloy Structural Steel Plates

Pre Page: Wire Shaping, Rewinding Spooling,... Next Page: Expanded Mesh

Product (745)

Product Forms (14)

Quality Certificate (11)

Learning Gallery (30)

Incoloy News (9)

Inconel News (22)

Molybdenum News (7)

Nikrothal News (4)

Nichrome News (13)

Titanium News (2)

Nickel News (8)

Alloys House (30)

Tools (27)

Nickel alloy News (30)

Latest Buzz (30)

nickel chrome copper iron alloys news (28)

Credit Report

Products Index

Company Info

Product Forms