Inconel 600 Strips

         Inconel 600 strip has corrosion resistance to many corrosive media. Chromium content made it with better corrosion resistance than Nickel 99.2 (alloy200) and Nickel 99.2 (alloy201, low carbon) in the oxidize environment. Meantime, high Nickel content makes this alloy with good corrosion resistance in the reduction condition and alkaline solution, and also effective avoid chlorine-iron stress corrosion cracking. Inconel 600 strip has good corrosion resistance in the acid, acetic acid, formic acid, stearic acid and other organic acid, with medium corrosion resistance in the inorganic acid. Especially excellent corrosion resistance to dry chlorine and chlorine hydride applied up to 650℃. When under the high temperature, annealing and state solution alloy have good antioxidant off and high-intensity in the air, Inconel 600 strip can resist the ammonia, nitriding and carburizing atmosphere, but at the turn of the changes in redox conditions, it will be corrosion by parts of oxidation media.( such as green death liquid)

In feed water systems Inconel 600 strip is practically free of corrosion. It resists flowing sea water, but will corrode in stagnant sea water. The Inconel strip has fair resistance to sulphuric acid at room temperature, but should not be used in this application at elevated temperatures. Resistance to hydrochloric acid is similar to sulphuric acid. The alloy has excellent resistance to phosphoric acid at room temperature in all concentrations, but is rapidly attacked at elevated temperature. Inconel 600 strip is practically free from chloride ion stress corrosion cracking. Please consult Xinxing Nickel Wire Mesh Factory for advice on your specific application.

         Inconel 600 strip has good resistance to oxidation at high temperature. Inconel 600 strip out performs all other alloys for resistance to nitridation in cracked ammonia. Inconel 600 strip should not be used in sulphur containing atmospheres at high temperature, particularly if the conditions are reducing. It resists dry chlorine and hydrochloric acid gas at moderate temperatures.

Aolly status

Tensile strength

Yield strength

Elongation

Brinell hardness

Rm N/mm²

R P 0. 2N/mm²

A 5 %

HB

Annealing treatment

550

240

30

≤195

Solution treatment

500

180

35

≤185

%

Ni

Cr

Fe

C

Mn

Si

Cu

P

S

Min.

72

14

6

Max.

17

10

0.15

1

0.5

0.5

0.015

0.015