Inconel 601 Wire

                                                                
                                                                           Inconel 601 Wire

Inconel 601 Wire is a solid solution nickel chromium heat resisting alloy which gives outstanding performance at temperatures up to about 1260℃. Inconel 601 wire has excellent resistance to high temperature oxidation, a general purpose material for applications where heat and corrosion resistance are the primary considerations. Inconel 601 wire also has good aqueous corrosion resistance due to the high nickel content in combination with chromium. Its Strength and toughness are good, and are retained during extended service at high temperature.

        
Inconel 601 Wie Typical Applications:

Inconel 601Description:

Inconel 601 also has good resistance to carburizing but should not be used in atmospheres containing sulphur, particularly reducing sulphur. Inconel 601 has good resistance to nitriding in dissociated ammonia, and is only outperformed by Inconel 600 in this application. Inconel 601 has good strength, ductility and toughness, and can be used at cryogenic temperatures.

Inconel 601 Wire Oxidation Resistance:

Inconel 601 has outstanding resistance to high temperature oxidation. It resists oxidation and spalling at temperatures as high as 1260℃. The protective oxide coating resists scaling even under severe conditions, and the alloy also has good resistance to carburization and nitridation. Its resistance to sulphur is poor and it should not be used in atmospheres containing sulphur, particularly reducing sulphur.

Inconel 601Wire Corrosion Resistance:

Inconel 601 has excellent corrosion resistance to the mineral acids, similar to Inconel 600. Inconel 601 has good resistance to sodium hydroxide solutions and because of the high nickel content good resistance to chloride stress corrosion cracking. As with austenitic stainless steels Inconel 601 can be sensitised to intergranular corrosion in some aggressive media after heating in the temperature range 540 - 760℃. Please consult Xinxing Nickel Wire Mesh Factory for your specific application.

Wire Diameter: 5.0mm-0.05mm, 4 Gauge- 44Gauge,   0.20Inch-0.002Inch

Wire Status: hydrogen annealing OR NOT

Wire Further Processing	Cut to length Wire
	Flat Wire
	Square and Shaped Wire
	Rewinding and spooling
	Polishing and cleaning

Customer Service has more information about Wire Further Processing